====== COUNTNZ() Function (Count Non-Zero) ======

The COUNTNZ() function can be used to get the number of minutes a value is greater than a threshold value

Usage:

''COUNTNZ(variable, options, val,[start_hour],[end_hour])'' 

**variable** - the variable name to check

**options** - see below

**val** - optional - the threshold value to be greater than (0 is the default)

**start_hour** - option for 'diff in range (option 5) when period is 1 day - start hour (0-23)

**end_hour** - option for 'diff in range (option 5) when period is 1 day - end hour (0-23) - set start and end to 0 to ignore this


===== Generic Variables (per device type) =====

''COUNTNZ('genset_on',1)'' 

Get the number of minutes that genset_on was greater than 0 for the current day

''COUNTNZ('voltage',5,100)'' 

Get the number of minutes the voltage was greater than 100v for the selected period


===== Device - Specific Variables =====

For device specific variables use a . to separate the device name:

''COUNTNZ('My Device.My Value',1)''


===== Option Parameters =====

The second parameter, [options] is a number and can be any of the following

|1 | DAY - Number of minutes non-zero today|
|2 | WEEK - Number of minutes non-zero for the week |
|3 | MONTH - Number of minutes non-zero for during the month |
|4 | YEAR - Number of minutes non-zero for during the current year |
|5 | PERIOD - Number of minutes non-zero for the selected range |
|6 | SLICE - Number of minutes non-zero for variable changed during the slice in the range (i.e. in a graph segment) |


===== Example =====
Get the uptime in percent based on voltage for the day (1440 minutes per day)

''100*(COUNTNZ('voltage',1)/1440)''

Possible return values: 0 - 100

===== Example2 =====
Get the minutes the DG was running for between 6am and 6 pm (18)

''(COUNTNZ('DG1_AC_Active_Power',5,0,6,18))''